The ultimate workstation for guitar players : power attenuation, live, recording, playing at home...

With the experience gained over the years with the 15, 22, 50 and 100w models, and also with the Nocab, we would like to introduce you the ultimate workstation for your guitar works! A single box for many applications as a you can see below.

Power Attenuation

The Power Attenuator Pro keeps the technology we use from the others P&P products. Sound transparence and quality was our first objective when concepting it. This power attenuator will allow you to reduce the power of your amp until -30dB (6-positions : Off/-10dB/-15dB/-20dB/-25dB/-30dB, Off is a true bypass) on all 130w max power amplifiers (which mean 98% of the world guitar amplifiers production). A 80mm fan cools the entire efficiently. It is still self-powered and turn only when necessary, but you can also connect a power supply (6-12v) if you want to force it to run permanently.

The Power Attenuator Pro is a multi-impedance equipment (4 / 8 / 16 ohms).

Recording, playing live, playing at home with headphone...
The Power Attenuator PRO borrow to the Nocab its five cab simualtions on two balanced output (jack + XLR).

These balanced outputs allow you to : Silent recording (if the "Mute" toggle swith is on) by connecting the Power Attenuator Pro to your recording system with an xlr or jack cable, Home playing with headphones while keeping your usual config (amp, effects...), Playing live by connecting the Power Attenuator Pro to your sound system. A 6-position selector switch gives you the choice between five cab sims :

• Off
• Modern
• Closed Back
• Open Back
• Tweed
• Vintage

In every situations

Your neighbors are not musical ? You would like to easily control the volume of your amp ? You would like to obtain a crunch sound from your clean sound, but you don't have a master volume ? You want to record your guitar in silence? Play at home with headphones? Playing live without a mic in front of your amp?
Or you just want to obtain the best of your tubes ? Power Attenuator 100 was made for you !
Power Attenuator Pro requires no power supply. Like most of our products, it is hand wired point to point (no circuit board).
You'll find everything you need to connect it to your amp in the P&P Shop.

Dimension : 20*13*6cm
Specs :

• Power attenuator 130w maximum
• Multi-impedance 4 / 8 / 16 ohms
• 5 disconnectable HP simulations
  
• Load Box mode
• Balanced headphone output
  
• 2 balanced outputs in jack and XLR format
• 1 AMP input, 1 SPEAKER output
• Possibility of powering the fan directly